Rain Cap
CI/CT and CT/CI Adaptor
Increaser/Reducer
Straight Adaptor
Flashings
Wall Support
Adjustable Wall Support
Roof Support
Top Support
Supporting Band
Suspension Band
Roof Brace
Wall Band
Guy Wire Band
Centering Bands
Finishing Cone
Tees
Elbows
Lengths
-
Rain Cap
-
CI/CT and CT/CI Adaptor
-
Increaser/Reducer
Available for all 12 diameters 5 to 6 in. (125 to 150mm) (RA,RR) -
Straight Adaptor
-
Flashings
Flat, Adjustable 5° to 30°, and Adjustable 30° to 45° flashings available. (EP,E30,E45) -
Wall Support
-
Adjustable Wall Support
Installed at the base of a pipe, it supports the CT while ensuring an adjustable clearance from the surface to which it is secured. Adjustable from 2 to 6 in. (50 to 152mm). (SMA) -
Roof Support
Support the chimney from above rather than below. (ST) -
Top Support
Attached to the top or anywhere the masonry chimney, it supports and aligns the CT liner. (SS) -
Supporting Band
Used with guy wires (not included) attached to the first section of the CT liner, it supports the system going down a masonry chimney. Guy wires can be attached to the top support plate to secure the weight of the system. (BD) -
Suspension Band
Used for supporting and guiding in horizontal runs. (BDS) -
Roof Brace
Used for bracing in vertical installation above the roof. See instruction manual for required specifications. (BT) -
Wall Band
Secures the pipe along a horizontal, vertical or oblique surface. It must be used at intervals of 8 ft. (2.50m). (BM, BE) -
Guy Wire Band
Used for guiding in vertical installations. (BH) -
Centering Bands
Secured by tightening beneath one of the end bulges on the CT length, the centering band centers the CT inside of the masonry chimney. (BA) -
Finishing Cone
-
Tees
Continuous welded seam. 90°, 95° and 140° in all 12 diameters. (T90, T95, T135 and T140) -
Elbows
Continuous welded seam. Used to offset the liner. (D5, D15, D45, D85 and D90). -
Lengths
Four standard lengths of (L12, L18, L24, and L36) inches are available. Available in 5” to 24” diameters. Adjustable length (LA): 0 to 14 inches (0 to 356 mm) with a drain length of 9 inches (230mm).